 |
| 高速提升型电/气控阀 Valvair High Speed Inline Poppet Valves |
 |
2-Way and 3-Way, normally closed and normally open function.
Three basic body sizes 3/8, 3/4, and 1-1/4 inch.
Port sizes 1/4 through 1-1/2 inch.
Compact inline design.
Epoxy resin encapsulated coil seals out moisture, preventing corrosion of windings.
Continuous duty type service available.
Short stroke piston poppet gives extremely fast consistent response.
Solenoid air pilot and remote air pilot models available.
6-Port sizes with oversized exhaust ports included.
Prelubed to permit use with non-lubricated air.
High flow – Cv to 23.3.
Suitable for low pressure and vacuum service with external pilot.
Locking manual overrides standard. Non-locking overrides optional.
Variety of operators available; direct conduit,(JIC) junction box.
|
| 高速耐久型电磁换向阀 Speed King SK-200 & Valvair II Directional Control Valves |
 |
Full Air Operation for fastest response.
Plug-ln Design simplifies maintenance and installation. Reduces downtime.
Solenoids Interchange between all styles of plug-in valves.
Locking Manual Overrides Standard.Non-locking overrides optional.
Indicator Lights Standard on 120VAC and 24VDC models.
Encapsulated Coil designed for low-power consumption and maximum life.
Plug-ln Subbase, Plug-ln Manifolds allow design flexibility.
Field Convertible to External Pilot Supply for vacuum or other services.
Synthetic Rubber O-Ring Seals are specially compounded for minimum compression and
friction for superior wear and abrasion resistance.
Precision Ground Spool floats on o-ring seals, closed center cross-over design
saves air.
CSA - Selected Valves are Canadian Standards Association approved for general purpose use.
|
| 手动/脚踏机械式换向阀 Valvair High Speed Inline Poppet Valves |
 |
1/4" to 1" NPTF ports (to 1-1/2" in lock-out).
Corrosion resistant bronze body*.
High flow brass spacers* position o-ring, permit reverse piping and vacuum service.
Specially compounded o-rings suitable for non-lube air service and low pressure oil service.
Floating stem of hard chrome plated stainless steel; no metal to metal contact.
Closed at crossover design for air savings.
Piped exhaust convenient for muffling.
Interchangeable operators: Knob/alm button/Lever/Clevis/Treadle/Pedal/Diaphragm/Cylinder
Interchangeable end sections: Stem stop/Reversible enclosed spring/Ball detent
Service without disturbing plumbing.
Dual mounting brackets on most models.
1-1/2" lockout valves use cast aluminum bodies,aluminum spacers and hard anodized stems.
|
| 各种辅件 Ferrules, Die Sets, Tank Valves,Air Chucks, Rotating Joints and Gauges |
 |
Brass Ferrules
Ferrule Contracting Die Sets
Ferrule Contracting Machine
Tank Valves Model No. 09166 0060
Tank Valves Model No. 00645 0060
Tank Valves Model No. 01468 0006
Air Chucks Model No. 05499 0000
Air Chucks Model No. 06658 0000
Air Chucks Model No. 06739 0000
Rotating Pressure Joints(They operate atpressures to 400 PSIG and speeds up to 5000 RPM.)
Air Pressure Gauges (Gauge Accuracy: 3% - 2% - 3%)
Hydraulic Pressure Gauges (Rugged design handles pressure surges and shock loads.Maintains
accuracy to 3% of full scale reading.
|
